Business

Osmo Oil Stain

When applying Osmo oil stain, there are some important factors to keep in mind. These factors include the characteristics of this product, how to apply it, and how to maintain it. Read on to learn more about Osmo oil stain and its advantages. You can even apply it on bare wood.

Application of Osmo oil stain

The Osmo Oil Stain 3564 was previously known as Tabac but is now called Tobacco. It must be applied on clean, dry wood surfaces. It does not need to be diluted and requires good ventilation. To avoid an off-white finish, it is necessary to apply a final coat of Osmo Polyx(r) Oil Raw.

Osmo Oil Stain is an oil finish that dries quickly and gives a beautiful, transparent finish. It is a great choice for both floors and furniture. You can apply two coats for a deeper colour tone. You can also use Osmo Polyx Oil Clear to protect the pigmented colour.

Before applying the Osmo Oil Stain, you should prepare the wood surface by lightly sanding the wood. Fine grit sandpaper should be used to gently sand the surface. Then, apply Osmo Polyx-Oil to the damaged wood.

Characteristics of Osmo oil stain

Osmo Oil Stain is a highly durable, water-based decorative stain that is suitable for all interior woods, including wooden flooring, stairs, and furniture surfaces. It contains organic pigments such as titanium dioxide and iron oxide and is resistant to water and various other chemicals. Its maximum VOC content is 500 g/L.

Osmo Oil Stain has a transparent and intensely colored base coat that is resistant to dirt, water, and abrasion. This stain is best applied thinly along the grain of the wood. It is available in a range of colours, including solid, textured, and transparent. It can be applied using an Osmo Microfibre Roller or a 150 mm floor brush. This stain can be left to dry for up to 12 hours, with good ventilation.

Osmo Oil Stain is suitable for untreated wood. Unlike traditional wood stains, it does not result in a visible transition. It can be applied in one coat, or an optional second coat can produce a richer colour tone. For a smooth and durable finish, Osmo Oil Stain can be overcoated with Osmo Polyx-Oil 3031 Matte or Osmo Top-Oil 3025 Natural.

Precautions to take before applying Osmo oil stain

Before applying Osmo Oil Stain to wooden surfaces, the surface must be dry and clean. Also, it must be frost-free. Then, sand the surface lightly with a fine-grit sandpaper. Osmo Polyx-Oil can then be applied to damaged wood or bare wood.

It is important to note that furniture oils are designed for exterior wooden furniture but can also be used on softwoods. However, it is important to consult with the manufacturer for its recommended compatibility advice. Also, some Osmo exterior ranges may require that the timber weathers before they can be used.

Osmo Oil Stain is available in a clear matt finish and various coloured satin finishes. While a clear finish does not provide UV protection, coloured finishes do.

Maintenance of Osmo oil stain

Osmo Oil Stain is a natural stain made from oils derived from plants, such as thistle and soya. The stain is resistant to water, dirt, and abrasion. Because it uses plant ingredients, it is safe for plants and animals. It can be used on a variety of surfaces, including wood, non-glazed natural ceramic tile, and strip parquet.

Osmo Oil Stain can be applied using the Osmo Microfibre Roller or Double Blade Scraper, and the stain can be buffed away with a lint-free cloth. When applied by roller, the stain requires a top-coat of Osmo Polyx-Oil 3031 Matte or Osmo Top-Oil 3025 Natural to prevent an off-white finish.

To maintain Osmo Oil, apply a coat after a few days. However, be careful not to use household cleaning solutions and multi-purpose cleaners as they can discolour or stain the product.

Related Articles

Leave a Reply

Back to top button